315
To delete any of the lines, click on the
Delete
icon
and then click on the line inside the
Preview
window.
Overlap Columns
and
Overlap Rows
: If you want an overlap created so that each tile slightly overlaps
with an adjacent one, check the box and then enter the desired overlap:
•
After clicking on
OK
, you won’t observe any changes on the
Cutting Mat
or on the
Layers Panel.
The
results of the
Tiling
process will apply once you enter the cutting window. Refer to
Section 10.06.3
.
10.06 Cut Settings
The cut settings will vary from one cutter to the next based on the brand and model of that cutter and its built-in
functionality. For this reason, the information presented here will only apply to the brand and model of cutter
presented in Chapters 1 and 2.
10.06.1 Cut Window Settings
•
When you are ready to execute a cut (or draw), the cut window can be opened using either of the following:
Click on the
Cutter
icon
on the
Toolbar
Go to
Cutter>Cut With KNK Force
(or model you have added)
•
The following window will open:
Custom lines are
added.
Select
Custom
Purple lines
indicate an
overlap is applied
Check
Overlap
Columns
and/or
Overlap Rows
and
enter the desired
overlap size
Summary of Contents for KNK Force
Page 306: ...306...
