310
•
Print selection only
: This is one way to control what is printed. You will need to select the shapes to be
printed prior to entering the
window. Alternatively, you can hide layers on the
Layers Panel
that you
do not want printed.
•
If your
Cutting Mat
is larger than the printout dimensions, then make sure the shapes are located in the
upper left portion of the
Cutting Mat
or else any shapes outside of the printout boundary will be omitted or
cut off. To verify, click on the
Preview
icon
on the
Toolbar
and select
Show Print Margins
.
For example, let’s say you have a PNC application and your shapes are arranged like this on a 12” x
12”
Cutting Mat
:
When you click on the
Preview
icon and mark
Show print margins
, you can see that a portion of the
cow will not be printed:
You have two choices. You can either switch to
Landscape
printing under
File>Print Setup
or you can
move the shape on the right to be below the left shape:
Check this box so that the
original graphic appears
This part of the cow
will not be printed
This border indicates the
printer’s current settings
for size and orientation
Check this box to see the
boundaries of the printer
Option 1: Switch to
Landscape
under
File>Print Setup
Option 2: Rearrange the shapes
Summary of Contents for KNK Force
Page 306: ...306...
