322
In the
Cut Settings
, make sure
WYSIWYG
mode is selected and you have the other settings selected.
Then select the
Cut by Colors
tab and click on the blade icon
next to the yellow shapes to hide
those from cutting:
The cut is executed and the red, orange, and lilac shapes are cut. Then the same procedure can be
used for the remaining yellow shapes:
•
Cut each color separately (Separate jobs):
In this mode you can also turn or off colors for cutting.
However, SCAL will prompt for each color before executing the cut.
As an example, here is a layered design to be cut from vinyl:
The yellow shapes
are turned off
The
Preview
shows where the
shapes will cut and shows that
the yellow ones are excluded
Only the yellow
shapes are
turned on
The yellow scrap is placed in the
upper left corner of the mat to
match the
Preview
window
Summary of Contents for KNK Force
Page 306: ...306...
