KLIC-N-KUT KNK Force User Manual Download

Page: 44 / 401

•

The software will run in DEMO mode until a registration is purchased. This mode will have the following
limitations:



When cutting, horizontal lines will be added across the design



Digital shapes from the

eshape Store

cannot be downloaded



Exporting will add a DEMO watermark

•

Note that the demo version of SCAL5 will expire after 15 days.

3.01.2 Activating the Software

•

To convert the DEMO version into a registered version, click on

Activate

when opening the software and

seeing this popup screen:

•

IMPORTANT

: Make sure the version of SCAL you installed matches the registration you purchased. You

can verify this by going to

Help>About Sure Cuts a Lot

. If the wrong version is installed, uninstall this

current version and download the correct one.

•

After clicking on

Activate

, enter your name and the

Serial Number

you received after purchasing SCAL:

•

If you do not have an Internet connection on this computer or the automatic activation fails, use the

Activate

manually

option in the prior screenshot.



The window will then pop up a

Site Code

Click here to activate
SCAL

Click

to continue

in DEMO mode

Click here if you have
not yet purchased SCAL

Check this box to
activate manually

Enter your name and
purchased serial number

Click

to activate

Summary of Contents for KNK Force


















































































































































































































































































































































































































Search results

Summary of Contents for KNK Force

Reviews:

Related manuals for KNK Force

Brands by name

Popular brands

KLIC-N-KUT KNK Force, User Manual

Search results

Summary of Contents for KNK Force

Reviews:

Related manuals for KNK Force

Brands by name

Popular brands