KLIC-N-KUT KNK Force, User Manual

Page: 260 / 401

260
•
The Inset option can be used to create a gap between the original and the shadow, similar to the Knock
Out function in SCAL:
•
The color of the shadow can be changed by clicking on the color box next to Color and then selecting any
available color or entering actual color values. The following three samples are just a few of the thousands
of possibilities:
•
The Remove foreground option is the same as that used in the 3D Extrude function. It removes the
overlap so that one piece is not covering the other. This option is obviously not needed when the Inset
value is greater than 0.

Remove foreground not marked:

Remove foreground marked:
X Offset = 0.5
Y Offset = 0.2
Inset = 0
X Offset = 0.5
Y Offset = 0.2
Inset = 0.1
X Offset = 0.5
Y Offset = 0.2
Inset = 0.2
X Offset = 0.3
Y Offset = -0.1
Inset = 0.1
X Offset = -0.4
Y Offset = -0.2
Inset = 0.1
X Offset = 06
Y Offset = 0.2
Inset = 0.05