318
▪
Do Nothing:
the head stops at the location where it finished cutting
o
Cut selection only
: If you have pre-selected which shapes you want to cut, then mark this box.
o
Mirror H
and
Mirror V
: Options to check if you want the shapes mirrored for cutting. This is very
handy when cutting HTV or embossing. In both cases, you will be flipping over the material once the
cutting or embossing is complete.
Cutting/Drawing Settings:
As mentioned earlier, this section will vary considerably from one
brand/model of cutter to the next:
o
First, select the
Tool
(left or right side) and then, if you like, select from the
Preset
menu, the
material you will be cutting. Alternatively, make any changes to the settings for this material. If you
wish to save the new settings, click on the icon
to the right of
Preset
and the following window
will open:
o
Presets for the
Holder
are also available to select. If you wish to enter a new
Preset
, first make
changes to the
Blade Offset
and
Overcut
settings. Then click on the icon
to the right of
Holder
.
The following window will open:
Click here to change out a
tool on the KNK Force
Select
Tool
(1 or 2)
Select a
Preset
of
suggested settings
Add a new
Preset
Select type of tool
Change settings,
as needed
Add a new tool
Select type of action
Name the new
Preset
Select which settings to
include in the new
Preset
Click
OK
when done
Summary of Contents for KNK Force
Page 306: ...306...
