29
(5) Verify that the pinch wheels are aligned under the gray rectangles.
(6) Set the
Blade Tension
on the blade holder based on the material to be cut. Refer to the table at the end of
this chapter for recommended
Blade Tension
settings.
(7) Go to the
Cut Settings
window and click on
Replace Tool
and follow the on-screen instructions
.
Set the
Z
Origin
with the tip of the blade touching the top of the mat (or the top of the rolled material). Refer back, if
necessary, to
Section 1.06.4.
Always use the far left and far right pinch
wheels with the cutting mat.
Wheels should be centered
under the gray rectangles.
Summary of Contents for KNK Force
Page 306: ...306...
