KLIC-N-KUT KNK Force, User Manual

Page: 292 / 401

292
•
There are 4 available Cut Modes when cutting to the KNK Zing Orbit:

WYSIWYG
– Shapes will cut relative to their position on the virtual Cutting Mat

Origin Point
– Shapes will cut to align with the origin set before cutting

Center Point
– Shapes will cut to center around the origin set before cutting

Print and Cut
– Shapes will cut based on manual or automatic alignment with printed registration marks
(refer to Chapter 11 )
•
The Orientation is set on the Document Panel :
•
The choice between Portrait and Landscape is a personal one
– use whichever one makes the most sense
to you. For long projects, such as for large vinyl cuts, Landscape is usually chosen because the project
displays better on the computer monitor. However, you still have the option to use Portrait , if desired.
•
The Cut Mode is set in the Cut Settings window:
Landscape
Portrait
Select WYSIWYG ,
Origin Point , or
Center Point
Select either Vertical
(Portrait) or Horizontal
(Landscape)
Portrait
Landscape