329
10.07 Controlling Where Shapes Will Cut
10.07.1 Overview
•
There are two
Orientations
for cutting:
Portrait
– Shapes will cut in the same orientation you see on the
Cutting Mat
Landscape
– Shapes will cut 90
o
clockwise to the orientation you see on the
Cutting Mat
•
There are 3 available
Cut Modes
when cutting to the KNK Force:
WYSIWYG
– Shapes will cut relative to their position on the virtual Cutting Mat
Origin Point
– Shapes will cut to align with the origin set before cutting
Print and Cut
– Shapes will cut based on aligning the camera with printed registration marks (refer to
Chapter 11
)
•
The
Orientation
is set on the
Document Panel
:
•
The choice between
Portrait
and
Landscape
is a personal one
– use whichever one makes the most sense
to you. For long projects, such as for large vinyl cuts,
Landscape
is usually chosen because the project
displays better on the computer monitor. However, you still have the option to use
Portrait
, if desired.
•
The
Cut Mode
is set in the
Cut Settings
window:
Landscape
Portrait
Landscape
Portrait
into the
Select either
Vertical
(Portait)
or
Horizontal
(Landscape)
Summary of Contents for KNK Force
Page 306: ...306...
