281
The cut is executed and the red, orange, and lilac shapes are cut. Then the same procedure can be
used for the remaining yellow shapes:
•
Cut each color separately (Separate jobs):
In this mode you can also turn or off colors for cutting.
However, SCAL will prompt for each color before executing the cut.
As an example, here is a layered design to be cut from vinyl:
Choosing the option to
Cut each color separately
is logical because:
The shapes are arranged on top of one another
The size is so large that the individual colors cannot be placed on the cutting mat to cut all at one time
The yellow shapes
are turned off
The
Preview
shows where the
shapes will cut and shows that
the yellow ones are excluded
Only the yellow
shapes are
turned on
The yellow scrap is placed in the
upper left corner of the mat to
match the
Preview
window
Summary of Contents for KNK Force
Page 306: ...306...
