Hitachi Compute Blade 2000, Руководство пользователя

Страница: 1681 / 1927

1630
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(a) moduleStatusBlade group (2/34)
No
Object
identifier
OID Syntax
Acces
s
Description
8 bladeStatus
SensorCapa
cityTemperat
ure .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
5 Integer32 RO Shows the maximum number of
temperature sensors for a server
blade. (*2)
9 bladeStatus
CurrentCurre
ncy .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
6 Integer32 RO Shows the current being
consumed at present by the
server blade installed in the slot
shown in #5. This is shown as 1
for 0.1A. (*2)(*7)
10 bladeStatus
Current
Power .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
7 Integer32 RO Shows the power being
consumed at present by the
server blade installed in the slot
shown in #5. This is shown as 1
for 1W. (*2)(*7)
11 bladeStatusF
anRpm .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
8 Integer32 RO Shows the Rpm number of the
fan in the server blade. This is
shown as “0”.
12 bladeStatusF
anAirVolume .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
9 Integer32 RO Shows the air volume provided
by the fan in the server blade.
This is shown as “0”.
13 bladeStatusI
ntakeTemp .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
10 INTEGER RO Shows the inlet air temperature
status to the server blade
installed in the slot shown in #5.
(*3)
1: normal
2: higher-warning
3: error-warning
4: lower-warning
14 bladeVoltage
Table .1.3.6.1.4.1.11
6.5.39.3.2.2 Not-
Accessible NA Shows the table of information
on the voltage sensor with the
server blade.
15 bladeVoltage
Entry .1.3.6.1.4.1.11
6.5.39.3.2.2.1 Not-
Accessible NA Shows the table entry of
information on the voltage
sensor with the server blade.
16 bladeVoltInd
ex .1.3.6.1.4.1.11
6.5.39.3.2.2.1.
1 Integer32 RO Shows the index value ranging
from 1 to chassisCapacityBalde
to identify the table entry.
17 bladeVoltSe
nsor1Name .1.3.6.1.4.1.11
6.5.39.3.2.2.1.
2 Display
String RO Shows the voltage sensor name
for the server blade in the slot
shown in #5. (*4)
(*2) A value that the server blade obtains from a voltage and temperature sensor is shown.
“0” is shown if no server blade or no sensor is installed.
(*3) The reply is “normal” if no server blade is installed or the server blade power is off.
(*4) “Not install” is shown if no server blade is installed; “Not support” is shown if a server
blade is installed without any sensor; “Cannot get data” is shown if the data cannot be
obtained.
(*5) The response is “0” if no server blade or no sensor is installed. Obtain the MIB object of
the next OID, and determine whether or not the replied value is valid.
(*6) “invalid” is shown if no server blade or no sensor is installed; “unknown” is shown if no
information can be obtained”.
(*7) With SMP configuration, when the primary blade location in a partition is specified, the
values of the entire partition are displayed; when a blade location other than the primary
one is specified, “0” is displayed.