Hitachi Compute Blade 2000, Руководство пользователя

Страница: 987 / 1927

936
11
I/O S
lot
Expan
sion
Un
it

ILC command
You can set the internal network setting. Type
ILC
at the prompt and press
Enter
.
5713RF0 NNNNN(0)IOEU> ILC (Enter)
<< ILC - Internal LAN setting. >>
-- Internal network --
Network address : 192.168.253. 0
Subnetmask : 255.255.255. 0
-- Internal network menu --
E. Edit setting.
Q. Quit.
(E,[Q]) :
Select a menu item from the following table to execute it.
Menu Description
E. Edit setting. Sets the internal network.
Q. Quit Quits the ILC command.
Items displayed on the screen are described in the table below.
Item Description
Network address
Network address of internal network
Default value: 192.168.253.0
Subnetmask
Subnetmask of internal network
Default value: 255.255.255.0
If you type
E
in the ILC command menu and press Enter , the current setting is
displayed. At the prompt, enter an internal network address, and the changed setting
value is displayed. A warning message appears indicating that the I/O module will
restart after the setting change is displayed. A confirmation message appears. Type
Y
and press
Enter
. The internal network setting is saved. Then the I/O module will restart.
To cancel the setting, type
N
and press Enter , or just press Enter .
(E,[Q]) : E (Enter)
Network address : 192.168.253. 0
([Unchange]) :
192.168.200.0 (Enter)
-- Internal network --
Network address : 192.168.200. 0
Subnetmask : 255.255.255. 0
WARNING : If confirm, I/O module restart and this connect is lost.
Confirm? (Y,[N]) :
Y (Enter)
- <I/O module0> Restarting
(Disconnected.)