Hitachi Compute Blade 2000, Руководство пользователя

Страница: 1721 / 1927

1670
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(b) moduleStatusMm group (3/7)
No
Object
identifier
OID Syntax Access Description
16 mmVoltSensor
1Valid .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.4 INTEGER RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
17 mmVoltSensor
2Name .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.5 Display
String RO Shows the voltage sensor
name for the management
module in the slot shown in #5.
(*4)
18 mmVoltSensor
2Value .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.6 Integer32 RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1 V.
The actual value is one-tenth of
the response value.
19 mmVoltSensor
2Valid .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.7 INTEGER RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
20 mmVoltSensor
3Name .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.8 Display
String RO Shows the voltage sensor
name for the management
module installed in the slot
shown in #5. (*4)
21 mmVoltSensor
3Value .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.9 Integer32 RO Shows the voltage value of the
management module installed
in the slot shown in #5. (*5) The
value is shown using the unit of
0.1 V. The actual value is one-
tenth of the response value.
22 mmVoltSensor
3Valid .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.10 INTEGER RO Shows the voltage value
validity of the management
module in the slot shown in #5.
One of the following values is
shown. (*6)
1: invalid
2: valid
3: unknown
(*1) “unknown” is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) “unknown” is shown when no management module is installed or the status cannot be
obtained. ”power-off” is shown after executing SDN in the process of setting
redundancy.
(*3) “0” is shown as the number of sensor when no management module is installed.
(*4) “Not install” is shown if no management module is installed or redundancy setting is on
the process; “Cannot get data” is shown if the data cannot be obtained.