1299
12
Log
ical
par
titio
ni
ng man
age
r
Value
Automatically generated by LPAR
manager
*1
User specified
*2
XX.XX.XX
(Vendor ID)
Fixed at 00.00.87 to indicate Hitachi
Between 00.00.00 and
FF.FF.FF
YY.YY
Eight higher order bits of the offset value
is taken out and added to 0x46D1. Then
endian conversion is performed.
Between 00.00 and
FF.FF
Excluding the range
generated by LPAR
manager
ZZ
Eight lower order bits of the offset value
Between 00 and FF
*1: The MAC address format above is not applied to LPARs that have performed
migration,
*2: The user cannot set a value that duplicates the MAC address automatically
generated by LPAR manager. Do not set a multicast address and broad cast
address.
Virtual NIC system number: 0 to 128 with LPAR manager expansion mode
With LPAR manager expansion mode, up to 16 virtual NICs can be assigned to one
LPAR. MAC addresses used by the system with Virtual NIC number 0 to 7, are
identical to those with LPAR manager standard mode. MAC addresses used by the
system with Virtual NIC number 8 to 15 are provided in the following string format.
Those MAC addresses are automatically generated by LPAR manager.
MAC address format: XX.XX.XX.YY.YY.ZZ
Calculate the offset value from the base point with the followings to generate a MAC
address.
1. LPAR 1 to 32 (0x0100 to 0x80FF)
Virtual NIC system number x 256 + (LPAR number – 1) x 8 + (Virtual NIC
number – 8)
2. LPAR 33 to 60 (0x8100 to 0xF0FF)
(Virtual NIC system number – 1) x 224 + (LPAR number – 33) x 8 +
(Virtual NIC number – 8)
MAC address
notation
Upper 8
bits
YY.YY value
1
62.4B
2
62.CB
3
62.2B
4
62.AB
|
|
45
62.7F
46
62.FF
47
E2.00
48
E2.80
|
|
127
E2.0A
128
E2.8A
|
|
247
E2.13
B
4
Internal format
1101
0001
0100
0110
Binary
Upper 8 bits of the calculation
result = 0x01
2
6
Origin (0x46D1)
1101
0010
0100
0110
After adding Virtual NIC
System Number
0000
0001
0100
1011
0110
0010
Rearrange bits in endian conversion
Hexadecimal value
Содержание Compute Blade 2000
