Hitachi Compute Blade 2000, Руководство пользователя

Страница: 729 / 1927

678
6
Manag
eme
nt
Module
Set
tin
gs
# Item Description
4 Type The type of the module.
Set such as: 1Gb LANSW, 1_10 LANSW, or 8G FCSW
5 Version Firmware version of the module
6 FRU The FRU information for the module
7 Sensor The value of a sensor installed in the switch module
8 ON Turns on power to the module.
9 OFF Turns off powers to the module.
10 Connection Connects to the web console of the switch module. Web
console-capable switch modules are as follows:
With the management module firmware version A0182 or
later:
-
1 Gb LAN switch module
-
1/10 Gb LAN switch module
-
Internal Fibre-channel switch
With the management module firmware version A0181 or
earlier:
-
Internal Fibre-channel switch
When you connect to the web console of a switch module
using the Connection button, configure the switch module
network as shown in the table below. Go to System web
console > Settings > The configuration of network >
Management LAN network general setting > The switch
module to configure the settings to configure the settings.
Item Connected to IP address
1 Gb LAN
switch module
Internal LAN
network
Not required
1/10 Gb LAN
switch module
Internal LAN
network
Not required
Internal Fibre-
channel switch
Management
LAN network or
an internal port
of the switch
module
Set an IP
address for the
PC to be
connected to
the web
console.
If you have configured the settings shown above with the LAN
switch module, check the switch module IP address referring
to Chapter 13 > Network Settings > Setting the IP address.
11 Turn on Turns on the Location ID LED for the module.
12 Turn off Turns off the Location ID LED for the module.

Role-dependent variation in available operations

To display detailed information about a switch module, the user must have switch
module permission for that module.

To perform actions on a switch module, the user must have switch module
permission for that module.