Hitachi Compute Blade 2000, Руководство пользователя

Страница: 856 / 1927

805
7
Co
nfig
ur
in
g t
he LAN S
wit
ch
Module
Command input mode overview
The command line interface for the system supports two command input modes: operation
command mode and configuration command mode.
You can execute operation commands in the operation command mode, and you can execute
configuration commands in the configuration command mode.
The command line interface for the system is classified into two user levels: a general user level
and a system administrator level. Operation command mode supports both the general user
level and system administrator level. Configuration command mode has only the system
administrator level.
The following table lists features of command input modes and details on how to access and
exit command input modes.
Command input modes
Command
input mode
User level Accessed by: Prompt Exited by: Note
Operation
command
General user
login: <user-
ID>
> > logout
You can use some
operation commands.
System
administrator
> enable # # disable You can use all operation
commands.
Configuration
command
System
administrator
# configure (config)# (config)#
exit
You can use all
configuration commands.
Operation command mode
(for the general user)
If you log in to the system, this mode will be set.
In this mode, you can run some operation commands that are enabled for the general
user level.
You cannot register a new user account and delete a user account in the general user
level. The registration and deletion requires the system administrator level.
Operation command mode
(for the system administrator)
If you enter the enable command in the general user mode, this mode will be set.
In this mode, you can use all operation commands.
The enable command is not initially assigned a password. To prevent security
deterioration, it is recommended that you assign a password to the enable command
and restrict system administrator qualifications to a specific user.