Hitachi Compute Blade 2000, Руководство пользователя

Страница: 957 / 1927

906
11
I/O S
lot
Expan
sion
Un
it
Condition Status: failure
status
------- No power supply module is
installed.
Normal No problem
FAIL The power supply fails.
AC input AC input status ------- No power supply module is
installed.
Normal AC input exists.
None No AC input.
AC input voltage setting is described in the table below.
Item
Description of
item
Value
Description of value
Voltage
AC input voltage
setting of the
power supply
100
AC input voltage: 100 V (Not
supported)
200 AC input voltage: 200 V
Unknown The setting value is unknown.

IOC command
You can display I/O module status and operate the module. Type
IOC
at the prompt,
and press Enter .
5713RF0 NNNNN(0)IOEU> IOC (Enter)
<< IOC – I/O module control. >>
-- I/O module status --
# Behavior Power Condition LID lamp
- -------- ----- ------------- --------
0 Active On Normal Off
1 Standby On Normal Off
-- I/O module control menu --
P. Power control.
L. LID lamp control.
Q. Quit.
(P,L,[Q]) :
Select a menu item from the following list to execute it.
Menu Description
P. Power control. Executes the power operation of the I/O module.
L. LID lamp control Executes the identification light-emitting diode (LED) of the
I/O module.
Q. Quit Quits the IOC command.
Items of I/O module status are described in the table below.
Item
Description of
item
Value
Description of value