Hitachi Compute Blade 2000, Руководство пользователя

Страница: 1409 / 1927

1358
12
Log
ical
par
titio
ni
ng man
age
r
The following table lists the errors contained in messages output by the command and the
corresponding termination codes.
Error message and
termination code
Description Action
Invalid Option.
0x01010000 An invalid option is specified. Check the command options.
Target Host
Unreachable.
0x01020000
The specified host is not found. Check that the specified address is
correct and that the specified
target host is operating normally.
Response Timeout.
0x01020001 The specified host has not
responded.
Check that the specified address is
correct and that the specified
target host is operating normally.
Unknown Data
Received.
0x01030000,
0x000000ce,
0x000000cc
Unexpected data has been
received.
Check that the specified target
host is operating normally.
failed to bind.
0x01030001 Network bind operation has failed. Check the communication
configuration. Alternatively, wait
for a while and retry.
failed to activate
session.
0x01030002
Failed to establish a
communication session.
Check the number of SC/BSM
devices concurrently connecting to
the LPAR manager and whether
other machines are executing the
HvmGetPerf command
simultaneously.
Cannot Write File
or Given Too
Long File Name.
0x01040000 Failed to write data to a file. Check that the specified file is
write-enabled.
Alternatively, shorten the length of
the filename.
Target LPAR is
undefined.
0x04000000
The specified LPAR is not defined. When using the lpar option,
specify only a defined LPAR.
Unexpected
Exception was
raised.
0xffffffff
An internal error has occurred. Check the command options,
network conditions, and the
operating status of the specified
LPAR manager.
Invalid Command
Received.
0x000000c1
The target host failed to accept the
HvmGetPerf command.
Check whether the LP IP address
is specified.