Hitachi Compute Blade 2000, Руководство пользователя

Страница: 306 / 1927

255
5
Server B
lad
e S
etup
Click a hard disk from disks displayed in
Logical View
or
Physical View
, and the same screen is displayed as when
you select
Drives > Properties
from the menu.
Select a disk array from disks displayed in
Logical View
,
and the same screen is displayed as when you select
Virtual Drives > Properties
from the menu.

Setting items for MegaRAID WebBIOS
This section describes the setting items and values for MegaRAID WebBIOS.

The same alphanumeric characters are used to associate the setup screen
and each of the items.

In the table, the underlined values are Default values. Those in brackets [ ] are
recommended values.
Example:
[Enabled (valid)]/
Disabled (invalid) : "Enabled" is the Default and also the
recommended value.
[Enabled (valid)] / Disabled (invalid) : "Disabled" is the Default value; and
"Enabled" is the recommended value, which requires a setting change.
When you need to change the setting from the Default to the recommended
value, the recommended value is emphasized in red .
Unless otherwise specified, use the recommended values
for all setting items. If you set non-recommended values,
the equipment is not supported and might not operate
properly.