Hitachi Compute Blade 2000, Руководство пользователя

Страница: 771 / 1927

720
6
Manag
eme
nt
Module
Set
tin
gs
# Item Description Edit
is executed, the management module setting will be
applied to the switch module.
No: Synchronization cannot be executed.
When Network OS version 3.0.0 is on a Brocade 10 Gb
DCB switch module, the default gateway setting from the
management module does not take effect on the switch
module. Log in to the switch module and configure it using
the ip route command. See the
Network OS Administrator's
Guide
for details. If Network OS version 2.0.1 is on the
switch module, you cannot configure the gateway.
The VLAN configured by users
# Item Description Edit
1 VLAN ID The LAN ID.
Set as: 2 to 4000
You can delete a VLAN by deleting its VLAN ID. Yes
2
External
connection port
The external connection port used by the VLAN.
You can select Management LAN port 0 or Management
LAN port 1.
Yes
3 MM, P0 to P7,
SW0 to SW5
Indicates which user-defined VLAN is associated with
each module and physical partition.
Yes
Internal LAN network
# Item Description Edit
1 Network address The network address of the internal LAN network:
Changing internal LAN network addresses makes the
management module restart.
Do not set the internal network address to 192.168.0.0 or
192.168.254.0.
Yes
2 Subnet mask The subnet mask of the internal LAN network.
Fixed at 255.255.255.0.
Do not change the internal network address while the
server blade works. If you do, failure error events, which
have occurred while the management module is restarting,
may not be detected.
When changing the address while the server blade with
N+M cold standby enabled is not in operation, make sure
to perform Smart Configure afterwards.
MAC address
# Item Description Edit
1 Module The module number.
2 Controller 0 The MAC address of controller 0.