Hitachi Compute Blade 2000, Руководство пользователя

Страница: 925 / 1927

874
11
I/O S
lot
Expan
sion
Un
it
Initial settings of the I/O slot expansion unit
The I/O slot expansion unit must be initialized for your environment.
This section describes how to initialize the I/O slot expansion unit.
The following data needs to be initialized:

Password for the administrator account

Setting of device identification information

Setting of network information such as IP addresses
To set items above, use the console functions.
Initial settings via system console
(1) First login
1 Boot the client software, such as Telnet or Serial terminal software, of the
system console.
2 Specify
192.168.0.65
to connect the client software, which is not required
for serial connection, and start the connection.
3 Fixed user account and password are set to Administrator account for the
system console at the time of shipment. Type the following user account and
password to login.
Item Setting at the shipment
User account administrator
Password password
4 When login is successful, you can type a command to perform.
(2) Password change in Administrator account
See “SO Command” in Chapter 6.
It is recommended that the Administrator account password
be changed.
Compute Blade 2000 I/O slot expansion unit I/O Module
ALL RIGHTS RESERVED,COPYRIGHT (C), 2010, HITACHI,LTD.
Chassis ID : 5713RF0 00108
Firmware Revision : A0100-Z-919
Use EX Command to logout.
Use HE Command to get a list of available commands.
5713RF0 00108(0)IOEU>