Hitachi Compute Blade 2000, Руководство пользователя

Страница: 1720 / 1927

1669
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
(b) moduleStatusMm group (2/7)
No
Object
identifier
OID Syntax
Acces
s
Description
8 mmStatusRun
ningStatus .1.3.6.1.4.1.1
16.5.39.3.3.1
.1.5 INTEGER RO Shows the running status of the
management module in the slot
shown in #5. One of the
following messages is shown.
(*2)
1: active
2: standby
3: unknown
9 mmStatusSen
sorCapacityVo
ltage .1.3.6.1.4.1.1
16.5.39.3.3.1
.1.6 Integer32 RO Shows the max number of
voltage sensors for the
management module in the slot
shown in #5. (*3)
10 mmStatusSen
sorCapacityTe
mperature .1.3.6.1.4.1.1
16.5.39.3.3.1
.1.7 Integer32 RO Shows the max number of
temperature sensors for the
management module in the slot
shown in #5. (*3)
11 mmVoltageTa
ble .1.3.6.1.4.1.1
16.5.39.3.3.2 Not-
Accessible NA Shows the table of information
on the voltage sensor for the
management module.
12 mmVoltageEnt
ry .1.3.6.1.4.1.1
16.5.39.3.3.2
.1 Not-
Accessible NA Shows the table entry describing
the information on the voltage
sensor for the management
module.
13 mmVoltIndex .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.1 Integer32 RO Shows the index value ranging
from 1 to chassisCapacityMm to
identify the table entry.
14 mmVoltSensor
1Name .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.2 Display
String RO Shows the voltage sensor name
for the management module in
the slot shown in #5. (*4)
15 mmVoltSensor
1Value .1.3.6.1.4.1.1
16.5.39.3.3.2
.1.3 Integer32 RO Shows the voltage value of the
management module in the slot
shown in #5. (*5) The value is
shown using the unit of 0.1 V.
The actual value is one-tenth of
the response value.
(*1) “unknown” is shown in the process of setting redundancy, or when no management
module is installed or the status cannot be obtained.
(*2) “unknown” is shown when no management module is installed or the status cannot be
obtained. ”power-off” is shown after executing SDN in the process of setting
redundancy.
(*3) “0” is shown as the number of sensor when no management module is installed.
(*4) “Not install” is shown if no management module is installed or redundancy setting is on
the process; “Cannot get data” is shown if the data cannot be obtained.
(*5) “0” is shown if no management module is installed or redundancy setting is on the
process, if the data cannot be obtained, or if no sensor exists.
(*6) “invalid” is shown if no management module is installed or redundancy setting is on the
process; “unknown” is shown if no data is obtained”.