Hitachi Compute Blade 2000, Руководство пользователя

Страница: 603 / 1927

552
6
Manag
eme
nt
Modul
e S
ett
in
gs
Item Description of item Value Description of value
Synchronize Apply the management
module setting to the switch
module
Yes Applies the setting held by the
management to the switch
module.
-
No switch module installed
or
-
Interface to view and update the
management interface LAN
setting is supported by the
switch module and the switch
module and management
module have the same setting.
Yes! Applies the setting held by the
management to the switch
module.
-
Interface to view and update the
management interface LAN
setting is supported by the
switch module and the switch
module and management
module have the different
settings.
No Does not apply the setting held by
the management module to the
switch module.
------- Internal connection is set.
Select a menu item from the following list to execute it.
Menu Description
A.
Edit all switch module
setting.
Sets the network setting of all switch modules.
N.
Edit one switch module
setting.
Edits the network setting of the individual switch module.
S.
Show the switch module
current network setting.
Displays the current setting of the switch module.
W.
Synchronize network
setting to switch module.
Applies the setting held by the management module to the
switch module.
Q. Quit Returns to the previous menu.
If you enter
A
and press Enter , the prompt for setting the switch module connection is
ready. Enter a setting value and press Enter , and then go to the next setting.
When you set the Ext setting to
Int
or
LOSW
, the other settings of the switch module
are automatically filled in.
When you set the Ext setting to
Ext
and the Synchronize setting to
No
, the other
settings of the switch module are automatically filled in.
When you set the Ext setting to
Ext
, the Synchronize setting to
Yes
, and IP address to
0.0.0.0, the other settings of the switch module are automatically filled in.
Then the new setting value is displayed. A message to confirm the setting is displayed.
At the prompt, enter
Y
and press Enter , and the network setting is saved in the switch
module. To cancel the setting, enter
N
and press Enter or just press Enter to confirm.