Hitachi Compute Blade 2000, Руководство пользователя

Страница: 1680 / 1927

1629
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
3 moduleStatus
moduleStatus consists of the following seven groups: moduleStatusBlade,
moduleStatusMm, moduleStatusSw, moduleStatusFan, moduleStatusPs,
moduleStatusPciRiser, and moduleStatusPcieSw. Each group is described in the
following table (a) to (g).
(a) moduleStatusBlade group (1/34)
This group consists of three tables: bladeStatusTable for the entire server blade
information, bladeVoltageTable for the voltage sensor information, and
bladeTemperatureTable for the temperature sensor information.
No
Object
identifier
OID Syntax
Acces
s
Description
1 moduleStatu
sBlade .1.3.6.1.4.1.11
6.5.39.3.2 Not-
Accessible NA Shows the server blade status.
2 bladeStatusT
able .1.3.6.1.4.1.11
6.5.39.3.2.1 Not-
Accessible NA Shows the table of information
on the server blade status.
3 bladeStatus
Entry .1.3.6.1.4.1.11
6.5.39.3.2.1.1 Not-
Accessible NA Shows the table entry describing
the information on the server
blade status.
4 bladeStatusI
ndex .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
1 Integer32 RO Shows the index value ranging
from 1 to chassisCapacityBlade
to identify the table entry.
5 bladeStatus
Slotnum .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
2 Integer32 RO Shows the server blade slot
number corresponding to the
index shown in #4, ranging from
0 to chassisCapacityBlade–1.
6 bladeStatus
HealthStatus .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
3 INTEGER RO Shows the status of the server
blade installed in the slot shown
in #5. One of the following
messages is shown. (*1)
1: normal
2: fail
3: unknown
7 bladeStatus
SensorCapa
cityVoltage .1.3.6.1.4.1.11
6.5.39.3.2.1.1.
4 Integer32 RO Shows the maximum number of
voltage sensors for a server
blade. (*2)
(*1) The reply is “unknown”, if no server blade is installed or the status cannot be obtained.
(*2) A value that the server blade obtains from a voltage and temperature sensor is shown.
“0” is shown if no server blade or no sensor is installed.
(*3) The reply is “normal” if no server blade is installed or the server blade power is off.
(*4) “Not install” is shown if no server blade is installed; “Not support” is shown if a server
blade is installed without any sensor; “Cannot get data” is shown if the data cannot be
obtained.
(*5) The response is “0” if no server blade or no sensor is installed. Obtain the MIB object of
the next OID, and determine whether or not the replied value is valid.
(*6) “invalid” is shown if no server blade or no sensor is installed; “unknown” is shown if no
information can be obtained”.