Toshiba GR 200 Series, Instruction Manual

Page: 986 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 965 -
Table 5.6-1 Settings of LED indictors #3 to #26 (Function ID: 201B01))
Setting items Range
Units
Contents
Default setting
value
LED#3 Color
RED / GREEN / YELLOW - LED#3 color selection RED
Input signal1 (Preferred Data ID) - Set a Data ID at the first input on LED3 (No Assigned)
Input signal2 (Preferred Data ID) - Set a Data ID at the second input on LED#3. (No Assigned)
Input signal3 (Preferred Data ID) - Set a Data ID at the third input on LED#3. (No Assigned)
Input signal4 (Preferred Data ID) - Set a Data ID at the forth input on LED#3. (No Assigned)
Input signal5 (Preferred Data ID) - Set a Data ID at the fifth input on LED#3. (No Assigned)
Input signal6 (Preferred Data ID) - Set a Data ID at the sixth input on LED#3. (No Assigned)
Input signal7 (Preferred Data ID) - Set a Data ID at the seventh input on LED#3. (No Assigned)
Input signal8 (Preferred Data ID) - Set a Data ID at the eighth input on LED#3. (No Assigned)
LOGIC-SW AND / OR / XOR - Switch for logic-gate operation on LED#3 AND
On Delay Timer 0.00 – 300.00 s Set a value for an on-delay-timer on LED#3 0.00
Off Delay Timer 0.00 – 300.00 s Set a value for an off-delay-timer on LED#3 0.00
INVERSE-SW Normal / Inverse - Inversion operation of LED#3 signal Normal
TIMER-SW Off/Delay/Dwell/Latch/Blink - Selection of a type in the delay timer on LED#3 Off
Logic Timer 0.00 – 300.00 s Off delay timer value for "Delay" and "Dwell" circuit 0.00
Reset signal (Preferred Data ID) - Setting Data ID for "Latch" circuit (No Assigned)
LED#4 Color
RED / GREEN / YELLOW - LED#4 color selection RED
Input signal1 (Preferred Data ID) - Set a Data ID at the first input on LED#4 (No Assigned)
Input signal2 (Preferred Data ID) - Set a Data ID at the second input on LED#4. (No Assigned)
Input signal3 (Preferred Data ID) - Set a Data ID at the third input on LED#4. (No Assigned)
Input signal4 (Preferred Data ID) - Set a Data ID at the forth input on LED#4. (No Assigned)
Input signal5 (Preferred Data ID) - Set a Data ID at the fifth input on LED#4. (No Assigned)
Input signal6 (Preferred Data ID) - Set a Data ID at the sixth input on LED#4. (No Assigned)
Input signal7 (Preferred Data ID) - Set a Data ID at the seventh input on LED#4. (No Assigned)
Input signal8 (Preferred Data ID) - Set a Data ID at the eighth input on LED#4. (No Assigned)
LOGIC-SW AND / OR / XOR - Switch for logic-gate operation on LED#4 AND
On Delay Timer 0.00 – 300.00 s Set a value for an on-delay-timer on LED#4 0.00
Off Delay Timer 0.00 – 300.00 s Set a value for an off-delay-timer on LED#4 0.00
INVERSE-SW Normal / Inverse - Inversion operation of LED#4 signal Normal
TIMER-SW Off/Delay/Dwell/Latch/Blink - Selection of a type in the delay timer on LED#4 Off
Logic Timer 0.00 – 300.00 s Off delay timer value for "Delay" and "Dwell" circuit 0.00
Reset signal (Preferred Data ID) - Setting Data ID for "Latch" circuit (No Assigned)
……….
LED#26 Color
RED / GREEN / YELLOW - LED#26 color selection RED
Input signal1 (Preferred Data ID) - Set a Data ID at the first input on LED#26 (No Assigned)
Input signal2 (Preferred Data ID) - Set a Data ID at the second input on LED#26. (No Assigned)
Input signal3 (Preferred Data ID) - Set a Data ID at the third input on LED#26. (No Assigned)
Input signal4 (Preferred Data ID) - Set a Data ID at the forth input on LED#26. (No Assigned)
Input signal5 (Preferred Data ID) - Set a Data ID at the fifth input on LED#26. (No Assigned)
Input signal6 (Preferred Data ID) - Set a Data ID at the sixth input on LED#26. (No Assigned)
Input signal7 (Preferred Data ID) - Set a Data ID at the seventh input on LED#26. (No Assigned)
Input signal8 (Preferred Data ID) - Set a Data ID at the eighth input on LED#26. (No Assigned)
LOGIC-SW AND / OR / XOR - Switch for logic-gate operation on LED#26 AND
On Delay Timer 0.00 – 300.00 s Set a value for an on-delay-timer on LED#26 0.00
Off Delay Timer 0.00 – 300.00 s Set a value for an off-delay-timer on LED#26 0.00
INVERSE-SW Normal / Inverse - Inversion operation of LED#26 signal Normal
TIMER-SW Off/Delay/Dwell/Latch/Blink - Selection of a type in the delay timer on LED#26 Off
Logic Timer 0.00 – 300.00 s Off delay timer value for "Delay" and "Dwell" circuit 0.00
Reset signal (Preferred Data ID) - Setting Data ID for "Latch" circuit (No Assigned)