background image

LED EMERGENCY LIGHTS

EMERGENCY TERMINATIONS MAINTAINED/NON-MAINTAINED

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-
tions carefully before starting the installing and keep this manual handy for future reference. If you have any 
another query, please contact our dealer or local vendor from whom you have purchased the product. They 
are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. 
The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The 
company gives no warranty against damage to any surface due to incorrect removal and installation of the 
product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day 

would void the warranty. 

This product is warranted for manufacturing defects only.

1. Remove 2-PIN connector for 

Non-Maintained Operation

2. Connect battery lead

WARNING:

• This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance 
testing. Irreparable damage will occur if this instruction is not followed
• Recommended routine test procedure in accordance with BS5266
• Daily check – check that the status GREEN LED indicator is illuminated
• Monthly functional test – simulate a mains supply failure for approx. 30 secs by operation of key switch or 
switching off a circuit breaker. Ensure normal supply is restored after test and the indicator status LED is 
illuminated
• Twice yearly conduct a one hour duration test - simulate a mains supply failure for one hour continuous test 
by operation of key switch or switching off circuit breaker. Ensure normal supply is restored after test and the 
indicator status LED is illuminated
• Annual full three hour duration test - conduct a three hour continuous duration test. Simulate a mains supply 
failure for three hour continuous test by operation of key switch or switching off circuit breaker. Ensure normal 
supply is restored after test and the indicator status LED is illuminated
• Please make sure to turn off the power before starting the installation.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole 
luminaire shall be replaced.
• Replace any cracked protective shield.
• Installation should only be done by a certified electrician.
• For Indoor Use only

Model

VT-522-S

Wa�s

140

No. Of Led

16

Lumen

s

2

Working Time

>3 Hour

s

Body Type

PC

IP Ra

ng

IP20

Emergency Opera

on 

Time

>3 Hour

s

Charging Time

12 Hour

s

Ba

ery Charging 

Current

100-140mA

Ba

ery Di

s

charge 

Current

200-280mA

Ba

ery Type

Ni-Cd 3.6V,900mAh

Dimen

s

ion

355x46x200mm

Input Power

AC:220-240V,50/60Hz

3

YEA

RS

WARRANTY

*

This marking indicates that this 

product should not be disposed 

of with other household wastes.

Caution, risk of electric shock.

• When all connections have been made reassemble the fitting completely.

• Restore the supply and check that the Green LED indicator illuminates to confirm the batteries are charging. 

There are three possible reasons when the green LED indicator does not light up: 

1) there is no power supply AC220-240V,

2) the batteries are not properly connected to the PCB,

3) the batteries are not being charged.

• Allow a short period for partly charging the batteries and then isolate the mains supply to the fitting in order 

to check the correct operation of the fitting in emergency mode. After 36 hours on continuous charge (and only 

at a safe time) a mains failure should be simulated to ensure that the fitting illuminates for its rated emergency 

duration.

The luminaire will have a 1-hour backup after 14 hours charging and will be fully charged after 24 hours (first 

charge 36 hours)

MAINTENANCE

Once the luminaire no longer meets the rated emergency operation the batteries must be replaced after a 

maximum of 4 years in service.

Repairs should only be carried out by a qualified person. Please recycle disposal of replaced components where 

facilities exist. Special care should be taken if it’s required to open the fitting as the fitting may still be “live” 

even though the mains supply has been isolated. In these circumstances immediately disconnect the battery 

supply.

Servicing and cleaning should only be carried out after the fitting has been made electrically safe. Cleaning of 

luminaires should be carried out at regular intervals not only to ensure good optical performance but also 

ensure that dirt does not accumulate to such an extent as to impair the electrical or thermal safety of the 

fitting.

(Maintained)

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected]

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST 

DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

ENGLISH

ENGLISH

ENGLISH

MULTI-LANGUAGE 

MANUAL QR CODE

Please scan the QR code

to access the manual in

multiple languages.

SAFETY

• Installation of this luminiare should only be carried out by a qualified electrician or competent person to the 

current IEE Wiring Regulations (BS7671)

• Please isolate main prior to installation/maintenance.

• Check the total load on the circuit cable, fuse or circuit breaker.

• This product is Class II double insulated

INSTALLATION:

• Provide power to the required point of installation

• Cut a suitable aperture in the ceiling as per the cut-out details in Fig 1 ensuring that it does not infringe with 

electical cables, water/gas pipes or ceiling joists.

310mm

FIG1

48mm

• Remove 2 screws on top of the fitting (see Fig 2)

• Connect the battery to the inverter via the plug and socket provided.

Summary of Contents for VT-522-S














Reviews: