Toshiba GR 200 Series, Instruction Manual

Page: 860 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 839 -
4.9.5
Measurement of operation Intervals
The TPOS01 function can measure operation intervals time†, the intervals OT1 and OT2 can
represent the period of time when an earth-switch changes a position from another position.
As shown in Table 4.9-27 the eight intervals are defined as switching as shown in Figure 4.9-50
to Figure 4.9-53. The user should set scheme switch [
TPOS01-OPETMEN
]
On.
Signal “TPOS01_PT_P1”
Signal “TPOS01_PT_P2”
Signal “TPOS01_PT_P3”
Signal “TPOS01_P2EX_BO”
OT1 OT2
Sensing intermediate state
P1
P2-control
P2
Intermediate
a. Switch motion (P1 to P2) b. Operate command and signals with regard to the switch motion (P1 to P2)
Intermediate
P3
Figure 4.9-50 Two Intervals (OT1 and OT2) for P2 control
Signal “TPOS01_PT_P1”
Signal “TPOS01_PT_P2”
Signal “TPOS01_PT_P3”
Signal “TPOS01_P1EX_BO”
OT3 OT4
Sensing intermediate state
P1
P1-control
P2
Intermediate
a. Switch motion (P2 to P1) b. Operate command and signals with regard to the switch motion (P2 to P1)
Intermediate
P3
Figure 4.9-51 Two Intervals (OT3 and OT4) for P1 control
Signal “TPOS01_PT_P1”
Signal “TPOS01_PT_P2”
Signal “TPOS01_PT_P3”
Signal “TPOS01_P2EX_BO”
OT5 OT6
Sensing Intermediate state
P3
P2-control
P2
Intermediate
a. Switch motion (P3 to P2) b. Operate command and signals with regard to the switch motion (P3 to P2)
Intermediate
P1
Figure 4.9-52 Two Intervals (OP5 and OP6) for P2 control