6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 738 -
DPOS01 function (Function ID:
512001)
“DPOS01_ CC_SS”
(512001
_
8603011E95)
DEV01_CONTROL_REQ
Cancel command
Command
“Remote-cancel”
510001
_
7001016D08
510001 7001016D08
Input
Output
Cancel logic in DPOS01
Cancel condition
†
&
&
Successes to cancel
Operation Failed
“DPOS01_CC_FS”
(512001
_
8703011E96)
“Do nothing”
To
“Wait for a command”
Figure 4.8-15 ‘Cancel’ from the remote-end in DPOS01
†Note: The “cancel condition” logic shall be seen in Figure 4.8-18.
(ii)
Receiving “Cancel” from the local-end
Figure 4.8-16 depicts the cancel command procedure for a cancel command initiated from the
local-end.
Press cancel
command
Cancel from the front panel
Do nothing
Cancel
decision
Success
Failed
Cancel logic
Wait for a command
Operate logic
Operate command
Operate logic
Select logics
Selecting Off from remote-end
Selecting On from remote-end
Selecting Off from front panel
Selecting On from front panel
Selecting On by the PLC function
Selecting Off by the PLC function
Cancel from the remote end
Wait for a next command
Figure 4.8-16 Outline of ‘cancel’ command from the local-end
Input signal generated at the local-end
Figure 4.8-17 depicts the cancel logic when a “Cancel command (Local-cancel)” signal is applied
to the DPOS01 function. The signal is generated when the “Cancel” key is pressed on the IED
front panel; the user is not required to take account of mapping. When the logic receives the
“Local-cancel” signal, the logic ia able to output a result signal, provided that the “cancel
condition” checking is satisfied.
Summary of Contents for GR 200 Series
