6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 994 -
Overview of PLC function
PLC (Programmable Logic Controller) software is used for configuring the Inputs/outputs
(I/Os), alarms, indications, recording and others. PLC logic consist of “timers”, “flip-flops”, and
logic gates “AND, OR, XOR, NOT”. The user can configure PLC-logic using the PLC editor
(MULTIPROG®), which should be installed in the user’s PC. Figure 7.1-1 shows the screen for
the PLC editor.
Figure 7.1-1 PC screen of MULTIPROG®
Note: To handle the PLC editor on the PC, the user shall purchase a software license
(EP-261; see
Appendix: Ordering) from Toshiba sales representative. For more
information of PLC and MULTIPROG®, see separate manual
Basic manual:
Programmable Logic Controller and PLC editor (6F2S1904)).
PLC data error
The Automatic supervision reports the error information when an error occurs in PLC logic.
The error information† is shown in the Monitoring sub-menu on the IED screen. See Chapter
Automatic supervision: Supervision tasks: Supervision of data in PLC function
.
PLC data error
10:48
[Minor error]
1/1
[00000006] [00000000]
[00000000] [00000000]
[00000000] [00000000]
PLC error code
†
Figure 7.2-1 Error code at 1
st
row and 1
st
column on Monitoring sub-menu
Summary of Contents for GR 200 Series
