Toshiba GR 200 Series, Instruction Manual

Page: 1135 / 1563

6F2S1915 (0.46)
GRZ200 (Soft 031 & 032)
- 1114 -
(ii)
Error level
For the operation, the user can set the error level when the function detects the error
concerning the operation. Generally, the default error level has been set at level 3 (
Minor error
)
and level 4 (
Alarm
) for the faulty state and the undefined state, respectively. However, the user
can program them using settings. For example, when the user wish to program the fault and
undefined states in the DPSY01 function, use the settings [
CHK_DPOSSYN1:FLvl
] and
[
CHK_DPOSSYN1:ULvl
], respectively; then, set
On
for the setting [
CHK_DPOSSYN1:Sw
].
(iii)
Error message
When the function operates and detects error, an error message can be shown at the LED and
the LCD screen.
Table 10.2-79 Error messages provided by the supervisor in CHK_DPOSSYN/_DPOS/_TPOS
Message and level Meaning of the information
XXXX* undefine ‘Undefine” detected at * of the XXXX function
Error level
Minor error (Level 3) for ‘Faulty’; Alarm (Level 4) for
‘Undefine’
Table 10.2-80 Detailed information in Hexadecimal in CHK_DPOSSYN/_DPOS/_TPOS
Display
area
Meaning of the detailed information
Left column Right column
Top
row
00000001: Detecting ‘undefined’
00000002: Detecting ‘faulty’
(No information is displayed)
Middle
row
(No information is displayed) (No information is displayed)
Bottom
row
(No information is displayed) (No information is displayed)