manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 87

INSTRUMENT PANEL

5-7

Cruise Control Indicator*
(For Gasoline Engine)

This indicator comes on when
the cruise control is switched on.

Battery Charge Warning
Light

This warning light comes on when
the ignition switch is turned on and

go off when the engine is started. If this light doesn’t
go off after engine starting or comes on while driving,
it means there is a malfunction in the system. Have
the charging system checked by a Ssangyong Dealer
or Ssangyong Authorized Service Operation.

Seat Belt Reminder

The seat belt warning light comes
on and the seat belt warning
chime sound for 6 seconds when

the ignition switch is turned to “ON” position unless
the driver’s seat belt is securely fastened. This re-
minding operation stops when the driver fastens the
seat belt even during its operation period.

Low Fuel Level Warning
Light

This warning light indicates that
the fuel will soon be exhausted.

The time it takes to turn on, however, varies accord-
ing to the vehicle operating conditions or gradient
of the road. Refuel preferably before the warning
light comes on. Fill up the fuel tank immediately if
this warning light comes on.

Heated Glass Indicator

This indicator comes on when the out-
side rearview mirror and tailgate glass
heated glass is switched “ON”. It goes
out after specified period of time.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands