manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 58

INTERIOR SWITCHES

4 - 1 0

Decelerating with Cruise Control System

• While Cruise control system is running

1. Push down the DECEL.SET. Switch of a cruise control le-

ver and hold it until the desired speed is reached without a
brake pedal intervention. But the cruise control system
cannot maintain the cruise function at less than 34 km/h.

2. When the desired speed is reached, release the lever.

• When Cruise control system is not running

1. Push down the DECEL.SET. Switch of a cruise control le-

ver and hold it.

2. And then release the acceleration pedal, slowly.

3. When the desired speed is reached, release the lever. But

the cruise control system cannot maintain the cruise func-
tion at less than 34 km/h.

• Tap down while cruise control system is running

1. Push down the DECEL.SET. Switch of a cruise control le-

ver less than 0.5 second per one switching while the cruise
control system is running. This is a tap down switching.

2. When you operate a tap-down switching, the vehicle is de-

celerated for 1 km/h below the previous set speed.

3. If you want to decelerate for 10 km/h, operate the tap-down

switching ten times without brake pedal intervention.

Accelerating with Cruise Control System

• While cruise control system is running

1. Push up the ACCEL.SET. switch of a cruise control lever

and hold it until the desired speed is reached without an
acceleration pedal intervention.

2. When the desired speed is reached, release the lever.

• While cruise control system is not running

1. Accelerate using the acceleration pedal more over 36 km/h.

2. Push up the ACCEL.SET switch of a cruise control lever

and hold it.

3. And then release the acceleration pedal, slowly.

4. When the desired speed is reached, release the lever.

• Tap up while cruise control system is running

1. Push up the ACCEL.SET. switch of a cruise control lever

less than 0.5 second per one switching while the cruise
control system is running. This is a tap up switching.

2. When you operate a tap-up switching, the vehicle is accel-

erated for 1.3 km/h over the previous set speed.

3. If you want to accelerate for 13 km/h, operate the tap-up

switching ten times without accelerating with cruise con-
trol system.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands