manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 146

SEAT BELT AND AIR BAG

8-8

Lap Belt in Side Seat

2. Insert the metal latch

plate into the buckle un-
til it clicks.

3. Position the belt as low

as possible across
your hips, not across
your abdomen.

4. To unfasten the seat

belt, press the button
(B) on the buckle.

1. Pull out the latch plate

from the retractor in-
stalled at side bottom of
the seat.

Lap Belt in Center Jump Seat

1. Pull out the latch plate

from the retractor in
the side pocket.

2. Insert the metal latch

plate into the buckle
until it clicks.

3. Position the belt as

low as possible across
your hips, not across
your abdomen.

4. To unfasten the seat

belt, press the button
(B) on the buckle.

HOW TO FASTEN THE SEAT BELTS IN SECOND ROW SEAT

* Refer to the procedures in front seat.

• Put the lap belt as low as possible across the hips. Do not put it across waist. In an accident,

the belt may pressurize on your abdomen. This may also result serious internal injuries.

• Make sure that the latch plate is inserted into a correct buckle.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands