manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 169

VENTILATION, HEATING, AIR CONDITIONING AND AIR PURIFICATION SYSTEM

9-13

Air Source Selection and AQS
(Air Quality System) Switch

By pressing the switch, fresh air intake mode, recirculation
mode, and AQS ON/OFF changes alternatively. For details,
refer to the AQS section.

AQS system

deactivated,

recirculation mode

AQS system

deactivated, fresh

air intake mode

AQS system

activated

Defroster Switch

When you press the switch, the airflow direction will be
changed to windshield and door glasses, the air conditioner
operates automatically and outside air comes in. At this
moment, the (

), ( ), and (

) indicators come on. When

the defrosting is completed, press the switch to return to nor-
mal operations.

Air Conditioner Switch

When you press the switch, the (

) indicator comes on and

the air conditioner starts to operate, however, the "AUTO" in-
dicator goes out. When you press the switch again, the air
conditioner stops operation and indicator goes out.

To change the air source to recirculation mode during auto air condi-
tioner operation, get into manual air conditioner mode, then press the
air source selection switch.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands