manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 64

INTERIOR SWITCHES

4 - 1 6

SWITCHES ON DRIVER’S DOOR TRIM

1. Outside rearview mirror

folding switch

To fold the outside rearview
mirrors, press the switch for
more than 0.5 seconds. To
unfold the mirrors, press
again.

2. Mirror selection switch

“L”: Driver side mirror

“R”: Passenger side mirror

“•”: Neutral position

OUTSIDE REARVIEW MIRROR CONTROL SWITCH

Central
door lock/unlock switch

Recognizing Operation of the Mirror Position

When you folded or unfolded the outside rearview mirrors,
perform the recognizing operation of the mirror position in
the following order.

1. Fold/unfold the mirrors with folding switch.
2. The mirrors are folded/unfolded.
3. Fold/unfold the mirrors with folding switch after 10 seconds.
4. The mirrors are folded/unfolded.
5. The mirrors can be operated with folding switch after 10

seconds.

Window operation
switches

Window lock

switch

Outside rearview mirror

control switch

3. Aiming switch

Adjust the selected mirror up, down, left, or right by press-
ing the corresponding edges of the switch to get the di-
rect rearview.

• Do not fold or unfold the outside rearview mirrors manually. It may

cause a malfunction of the mirror folding system.

• If the outside rearview mirrors are folded or unfolded manually, an

abnormal noise may be produced during the folding switch operations.

• If you operate the outside rearview mirror folding switch within 10

seconds after starting the recognizing operation of the mirror position,
continuous abnormal noise may be produced.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands