SSANGYONG RODIUS 2006 Owner'S Manual Download Page 73

Page: 73 / 286

INTERIOR SWITCHES

4 - 2 5

Time Alarm Function

• The background of display window lights on and the dis-

playing letters becomes dark for 10 seconds at every hour.

• The background of display window lights on and the displaying

letters becomes dark for 3 seconds at every half hour.

Changing the user Interface Language

The user Interface language is changed between Korean and
English when pressing “ ” and “ ” buttons for more
than 1 second at a time.

TIME AND DATE MODE

Press briefly:

: Move to another mode

Date

Time
: AM & PM

Year

Month

Day

Press and hold

: Adjusting mode for

time and date

MON - TUE - WED - THU - FRI - SAT - SUN

A day of the week is automatically changed according to the adjusted
date, month, and year.

NOTE

Adjusting the Time and Date

1. Press and hold the MODE button for more than 1 second

to start time and date mode.

2. Move and select the information to be adjusted while briefly

pressing the MODE button (0.5 seconds). The selected
information is blinking.

Changing sequence

3. Adjust the information by using UP or DOWN button.

4. Press and hold the MODE button for more than 1 second

to set the time and date.

AM (PM)

Hour

Minute

Day

Month

Year

Summary of Contents for RODIUS 2006































































































































































































































































































Search results

Summary of Contents for RODIUS 2006

Reviews:

Brands by name

Popular brands

SSANGYONG RODIUS 2006, Owner'S Manual

Search results

Summary of Contents for RODIUS 2006

Reviews:

Brands by name

Popular brands