manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 164

VENTILATION, HEATING, AIR CONDITIONING AND AIR PURIFICATION SYSTEM

9-8

Air source selection switch

By pressing the switch, fresh air intake mode and recircula-
tion mode changes alternatively. When the recirculation mode
is selected, the indicator in the switch comes on. To defog,
set the air source to the fresh air intake mode and use the
defroster mode.

Defroster switch

When you press the switch, the airflow direction will be
changed to windshield and door glasses, the air conditioner
operates automatically and outside air comes in. When the
defrosting is completed, press the switch to return to normal
operations.

Air conditioner ON/OFF switch

To turn on the air conditioner, press this switch when the fan
speed switch is at any positions except OFF (      ) position.

At this moment, the indicator in the switch comes on.

To turn off the air conditioner, press the switch again.

• Use of recirculation mode for a long period of time can cause

stuffiness, headache, drowsiness, and fogged window.

• If exhaust gas comes in, there can be danger of Carbon monox-

ide toxication. Set to fresh air intake mode after passing through
dusty or polluted area.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands