SSANGYONG RODIUS 2006 Owner'S Manual Download Page 69

Page: 69 / 286

INTERIOR SWITCHES

4 - 2 1

HEATED GLASS SWITCH

Tailgate heated glass

Defrost and defog

Outside rearview
mirror heated glass*

Defrost and defog

Windshield heated glass*

Avoid wiper frozen

• Press this switch to turn on the windshield heated glass. It will operate for

about 12 minutes. However, the outside rearview mirror heated glass is
optional.

• Press the switch again to stop the operation.

• This switch is designed to defrost and defog on the windshield, tailgate glass

and outside rearview mirrors.

• The heated glass will operate for about 6 minutes when the switch is pressed

again within 10 minutes after completion of its first operation cycle.

• The indicators in the instrument panel and the switch come on when in use.

Heated glass indicator

Comes on when the windshied,
tailgate and outside rearview mir-
ror heated glass is operating.

Windshield, Tailgate
and Outside Rearview
Mirror Heated Glass

Tailgate and Outside
Rearview Mirror
Heated Glass

Windshield, Tailgate and Outside Rearview Mirror Heated Glass

Summary of Contents for RODIUS 2006































































































































































































































































































Search results

Summary of Contents for RODIUS 2006

Reviews:

Brands by name

Popular brands

SSANGYONG RODIUS 2006, Owner'S Manual

Search results

Summary of Contents for RODIUS 2006

Reviews:

Brands by name

Popular brands