manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 250

SERVICE AND MAINTENANCE

13-26

TYRE WEAR CHECK AND TYRE ROTATION

Tyre Wear Check

Tyre Rotation

To avoid uneven wear of tyres and to prolong tyre life, inspect
and rotate your tyres every 5,000 km.

When using the spare tyre

The tyres on your vehicle have built-in tread wear indicators
( ) that appear between the tread groove when the tread is
1.6 mm or less. The tyre should be replaced when the tread
worn down as far as one of the wear indicators.

• Driving on worn or damaged tyre is very dangerous and may cause

an accident. Also, a damaged tyre could burst.

• Check tyres regularly for damage (foreign bodies, punctures, cuts,

cracks, bulges in side walls) and replace if necessary.

WARNING

When not using the spare tyre

• Be sure to replace and rotate the tyres at Ssangyong Authorized Ser-

vice Operation or professional tyre shops.

• Mixing tyres could cause you to lose control while driving. Be sure

to use the same size and type tyres of the same manufacturer on
all wheels.

WARNING

Wear
limit

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands