manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 148

SEAT BELT AND AIR BAG

8-10

Rear three point seat belt (center - EU only)

1. Pull the Mini-latch plate (A) out of the seat belt

console installed at the ceiling.

2. Pull the Mini-latch plate (A) across the shoulder on

the left and insert it into the buckle (2) until it clicks.

3. Pull the latch plate (B) out of the seat belt con-

sole installed at the ceiling.

4. Pull the latch plate (B) across the hips and in-

sert it into the buckle (3) until it clicks.

5. To unfasten the seat belt, press the red (black)

button on the buckle.

Stow the seat belt into the console when it is not in use.

CAUTION

•

Make sure to fasten the seat belt according to the or-
der as described so that it functions properly.

•

To prevent the seat belt bumping against the rear glass,
unfasten the seat belt while holding it.

•

This seat belt is designed only for a passenger who
sits on the center seat in the second row seat.

•

Tug on the seat belt to make sure the latch plate is
securely locked.

•

Make sure that the seat belt is not twisted.

•

Improper wearing of seat belts increases the chance
of injury or death in a crash.

•

Do not position the seat belt to pass across your neck
and abdomen.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands