manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 105

TRANSMISSION AND BRAKE SYSTEM

6 - 7

N: Neutral position

-D+: Drive position

• This indicates the neutral position and use this position for

temporarily parking.

At this position, the engine does not transfer power to the
wheels and the vehicle will not move. However, for safety,
apply the brake while at rest.

To shift into “-D+” or “R” from “N” position after stopping
the vehicle, you have to depress the brake pedal.

• Use this position in normal driving conditions. The trans-

mission is automatically shifted from 1st gear through 5th
gear according to the vehicle speed and the acceleration
with accelerator pedal.

• Never shift into “N” from “-D+” position when the vehicle is moving,

or the transmission will be damaged.

• If you have to stop on a hill, depress the brake pedal securely.

WARNING

• Do not abruptly drive off or sharply accelerate the vehicle after

shifting into “-D+” position, or the transmission will be damaged.
Especially, when you drive off on a hill after stopping and parking
the vehicle, wait for a while until the shift indicator “D” and “1” will
come on with the brake pedal depressed.

• Even the gear is in “-D+” position, the vehicle can be moved down

on a uphill even according to gradients, so you have to depress
the brake pedal.

WARNING

Please note that the vehicle may slowly move forward on a level
ground when the selector lever is at “-D+” position.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands