manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 238

SERVICE AND MAINTENANCE

13-14

FUEL FILTER

1. Fuel filter

A. Opening direction of drain plug

2. Drain plug

B. Closing direction of drain plug

If the impurities in fuel gets into the engine and fuel related
devices, it may cause serious damage in affected
components. Make sure to replace the fuel filter according to
the specified maintenance schedule.

Be careful not to get into the foreign materials while chang-
ing hen replacing the fuel filter, clean around it to prevent the
impurities from flowing into the filter.

Press the priming pump until it becomes rigid.

Water Separating Function

If the water in fuel gets into the engine and fuel system, it
may cause serious damage in fuel system. The fuel filter of-
fers the water separating function to block the inflow of water.

• Replace the fuel filter according to the specified maintenance

schedule.

• Drain the water from fuel filter whenever replacing the engine oil.

• After replacing the fuel filter or draining the water, press the priming

pump until it becomes rigid.

CAUTION

• Service Interval

EU

General

Replace every 30,000 km (Draining water from fuel

filter: whenever replacing the engine oil)

Replace every 25,000 km (Draining water from fuel

filter: whenever replacing the engine oil)

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands