manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 284

INDEX

1 6 - 4

Seaters ................................................ 7-2
Second & third row seat (11-seaters)

...................................................... 7-14

Second row seat (7-seaters) ............ 7-8
Second row seat (9-seaters) .......... 7-10
Second row seat ................................ 8-7
Shift lever in manual transmission .. 6-2
Shift lever lock release .................... 6-10
Spare tyre and winter tyre ............. 13-27
Spark plugs .................................... 13-29
Specifications ..................................... 0-6
Starting the engine and driving off the

vehicle ............................................ 1-3

Starting the engine with jumper cables

...................................................... 12-2

Storage boxes and convenience

devices .......................................... 11-2

Sun visors .......................................... 11-6
Sunroof ................................................ 3-6
Supplementary heating device ......... 9-5
Switches in overhead console and

room lamp switches ................... 4-22

Switches in overhead console ....... 4-23
Switches on driver’s door trim ........ 4-16

T

Tailgate ................................................ 3-7
Third row seat (7-seaters) .............. 7-16
Third row seat (9-seaters) .............. 7-12
Tiltable steering wheel and horn ..... 11-8
Time and date mode ....................... 4-25

Towing a disabled vehicle ............ 12-14
Trailer towing* ................................ 12-17
Turbocharger inspection .................. 10-4
Tyre inflation pressure ................... 13-25
Tyre wear check and tyre rotation . 13-26

U

Underhood fuse box label ............. 13-21

V

Vehicle care ...................................... 15-2
Vehicle identification .......................... 0-9
Ventilation, heating, air conditioning and

air purification system ................... 9-2

W

Warning lights and indicators ........... 5-3
Warning triangle ............................. 12-23
Warnings and cautions when perform-

ing do-it-yourself operation ...... 13-28

Warnings and cautions ..................... 9-4
Warnings for air bag ........................ 8-16
Warnings for seat belt ..................... 8-12
Washer fluid .................................... 13-23
Water separator warning light and

engine check warning light ...... 12-13

Water separator warning light ........ 5-13
When the engine is overheating .. 12-12
Windows ............................................. 3-5
Wiper and washer switch .................. 4-7
Wiper blade replacement .............. 13-24

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands