manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 198

CONVENIENCE DEVICES

11-18

• An illegal copy of CD/DVD may cause a malfunction in the

audio/video head unit and an abnormal replay. Use only genu-
ine CD/DVD.

• Unusable discs may cause a malfunction in the system due

to different drive type. Use only usable discs.

• Do not use the audio/video/navigation system for a long time

when the engine is not running. The battery could be
discharged.

• Be careful not to spill water on the unit or to let any foreign

object into the system through the opened monitor.

• Do not apply excessive force to adjust, open, and close the

monitor. Do not impede the automatic movement of the unit.
It may cause a malfunction.

• Do not apply any impact and pressure to the monitor screen.

The LCD panel or touch screen panel can be damaged.

• When cleaning the touch screen, turn off the system and clean

the surface with a dry and soft cloth. Never use any coarse
cloth, hard cloth, chemical agent, volatile cleaning solvent
(alcohol, benzene, thinner) for cleaning the touch screen. The
screen surface can be damaged and discolored.

CAUTIONS WHEN USING AUDIO/VIDEO/NAVIGATION SYSTEM*

CAUTIONS

Usable Discs

Navigation Unit

• Map DVD for navigation

Head Unit

• DVD player: DVD/VCD/Audio CD/MP3 CD

• CD player: Audio CD

• CD + MP3 player: Audio CD, MP3 CD

CD changer

• Audio CD

DVD changer

• DVD/VCD/Audio CD/MP3 CD

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands