Home
/
SSANGYONG
/
RODIUS 2006
/
Owner'S Manual

SSANGYONG RODIUS 2006, Owner'S Manual

Share

Page: 149 / 286

SSANGYONG RODIUS 2006 Owner'S Manual Download Page 149

SEAT BELT AND AIR BAG

8-11

CHILD RESTRAINT

When transporting infants or small children, an appropriate child restraint
system should always be used. The child restraint system should be ap-
propriate for your child’s weight and height and properly fit the car’s seat.
Accident statistics indicate that children are safer when properly restrained
in the rear seat rather than in the front seat.

PREGNANT WOMEN

Ssangyong recommends that pregnant
women uses a seat belt to lessen the
chance of injury in an accident..

• Infants and small children should always be restrained in a infant or child restraint.

• NEVER INSTALL A REAR-FACING CHILD RESTRAINT IN FRONT SEAT WITH FRONT

PASSENGER AIR BAG.

• A child in a rear-facing child restraint installed in the front seat can be seriously

injured if the front passenger air bag inflates. Secure a rear-facing child restraint
in the rear seat.

• A front-facing child restraint should be secured in the rear seat whenever possible.

If installed in the front passenger seat, adjust the seat as far back as it will go.

• When installing a child restraint system, follow the instructions provided by the

manufacturer.

• When not in use, keep your child restraint system secured with a seat belt or

remove it from the vehicle.

• Do not hold a child while riding in a vehicle.

• Never let a child stand or kneel on any seat.

• Do not allow a child in the cargo areas while the vehicle is moving.

• Children who have outgrown child restraint systems should sit in the rear seat

and be restrained with the seat belt. If child’s seating position has a shoulder belt
which is on or very close to the face or neck, move the child close to the center
of the vehicle, slightly inboard of the shoulder belt, or move the child to a position
without a shoulder belt if possible.

• Please note that the three point seat belt is designed for a person who is taller

than 140 cm.

WARNING

Pregnant women and unborn child could be
injured.

• Use a lap-shoulder seat belt if possible

(Consult your doctor).

• Lap belt should be worn as low as pos-

sible throughout the pregnancy.

WARNING

«
...
147
148
149
150
151
...
»

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands