manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 160

VENTILATION, HEATING, AIR CONDITIONING AND AIR PURIFICATION SYSTEM

9-4

WARNINGS AND CAUTIONS

• If you sleep while air conditioner or heater on with all windows

closed. You may be suffocated to death.

• Continued operation in recirculation mode may cause interior to

become stuffy and windows to fog. Use recirculation mode for a
short period of time, and when driving through an area of smoke
or fume.

• Be sure to switch back to fresh air mode after passing through

an area of smoke or fume.

• Never leave a child or the handicapped person alone in a vehicle

with the air conditioner or heater on in hot or cold weather. Child
or the handicapped person can be in serious danger by the heat
and lack of oxygen.

WARNING

• If your vehicle has been parked in direct sunlight, open all win-

dows to extract heat before turning on the air conditioner.

• Operating the air conditioner for a long time with the vehicle parked

may cause the engine to overheat.

• During driving up long hills, turn on and off the air conditioner ev-

ery 3 ~ 5 minutes.

• To prevent battery from discharging, do not run the fan for an

extended period of time when the engine is not running.

• To maintain the system to its optimum state and to keep the lubri-

cation of the air conditioner compressor and related components,
run the air conditioner in low speed once a week.

CAUTION

• Do not stop the engine when the air conditioner is operating. It

may produce an unpleasant odor trapped in the duct. Turn the fan
off and wait for a few minutes in fresh air mode before stopping
the engine off.

• If you start the engine with the air conditioner on, the engine may

not start easily and the engine idling can be unstable causing ve-
hicle to vibrate. Be sure to turn off electrical systems such as
fan.

• When the air conditioner is not used in periods, odors will come

out. Run the air conditioner for 20~30 minutes with the doors
opened and you could remove the odors.

• During the winter when the air conditioner is not used regularly,

run the air conditioner once or twice every month for 5 ~ 10
minutes. Otherwise, the oil in the compressor will not be circu-
lated and could result in malfunctions. Do not forget to run the air
conditioner in low speed.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands