manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 42

OPENING AND CLOSING

3-4

Door Opening Lever (Outside  )

Child Safety Door Lock

Child safety door lock helps pre-
vent from an accidental door
open, especially when children
are in the vehicle. When the
child-safe lever is in the “LOCK”
position, the rear door can be
opened only from the outside.

Central Door Lock/Unlock Switch

Press the   section of the switch
to lock the doors and tailgate.

Press the   section of the switch
to unlock the doors and tailgate.

This switch is not available when
any of doors are not fully closed
and the vehicle is in theft deter-
rent mode.

Children in rear seats can open rear doors.

Move the child-safe lever to 

“LOCK”

 position.

WARNING

To open the door, pull the outside door handle outward.

The door should be already unlocked.

CAUTION

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands