manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 43

OPENING AND CLOSING

3-5

WINDOWS

Time Lag of Window
Operation

The operation of power window
can be continued for 30 seconds
even after turning the ignition
switch off. If you open the door
within this period of time, this lag
time is initiated again.

Window Lock Switch

If this switch is pressed, all door win-
dows are operated only by driver’s
door window switches. To deactivate,
press the switch again. The driver’s
door window operates without rela-
tions to window lock switch.

Driver’s Door Window Switch

• All windows can be operated when the ignition key is at

“ON”

 position.

• When the front of the switch is lightly pressed (stage 1), the

window will be lowered while the switch is pressed. When
pressed to its end (stage 2), the window will open automati-
cally until it is fully open. If you want to stop the window while
automatic lowering, lightly press the switch (stage 1)
again or pull up the switch.

• The other window can be operated only while the

appropriate switch is activated.

Rear Left Window
Switch

Central Door
Lock/Unlock
Switch

Passenger’s Door
Window Switch

Rear Right Window Switch

When closing the passenger’s and rear windows from driver’s seat,
be aware of safety conditions before operation. Parts of the body
can be trapped by the window.

CAUTION

When carrying children on the rear seat, press the rear door win-
dow lock switch to make the rear door switches inoperative. Do not
allow children to play with the power window switch and rear door
window switches.

WARNING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands