manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 232

SERVICE AND MAINTENANCE

1 3 - 8

Engine

The viscosity should be selected according to outside temperature. Do not
switch to a different viscosity in the event of brief temperature fluctuations.

SAE VISCOSITY CLASSES

The SAE classes (viscosity) should be selected in accordance with the average
seasonal air temperature.

Applying the SAE classes exactly on the basis of the outside air temperatures would
necessitate frequently changing the engine oil. The temperature limits for the SAE
classes should therefore be regarded as reference temperatures and the actual
air temperature may be higher or lower for a short period of time.

Regularly check the engine oil level and add
Ssangyong genuine engine oil if necessary.

CAUTION

• Clean the dipstick with clean cloth so

that any foreign materials cannot get into
the engine.

• Use only Ssangyong genuine engine oil.

• The oil should not go above the upper

mark on the dipstick.

• Operating with insufficient or too much

amount of oil can damage the engine.

WARNING

WARNINGS AND CAUTIONS
WHEN CHECKING

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands