manualshive.com logo in svg

SSANGYONG RODIUS 2006, Owner'S Manual

Share
Download
SSANGYONG RODIUS 2006 Owner'S Manual Download Page 193

CONVENIENCE DEVICES

11-13

CENTER CONSOLE (STORAGE BOXES, CD CHANGER, DVD CHANGER)

When using CD/DVD changer

When you open the cover and press
the button 

, the CD/DVD changer

case appears. For details, refer to the
separately provided operating manual.

Storage Box

DVD Changer

• To open the upper storage box, pull up the lever  .

• To open the lower storage box (or CD/DVD changer),

pull up the lever  .

 : Storage box

 : Varies according to option

• Storage box

• CD changer

• DVD changer

CD Changer

Aux jack

 (audio and video terminals)

can connect with camcorder, digital
camera and joy stick.

• Do not use accessories that exceed

rated capacity (12V/120W) which
may cause blown fuses.

Summary of Contents for RODIUS 2006































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands